This should be a fun one. This factory black BMW R1150RT is
going to become a autobahn cop bike. That's right with lights ,siren and paint ...the works

Here's a link to the PPG CLV SS system it will get

https://buyat.ppg.com/refinishProdu...aa-936411b3e942

Attached Thumbnails

 

Here's a link to a picture of what it's gonna look like. I can't seem to save a pic though, it's the green one .

http://rtp.autobahnpolizei.de/index.php?lang=eng

here we go We'll be useing PPG"s single stage CLV paint system http://www.autocolorlibrary.com/cmg/clv.html

Attached Thumbnails

 

__________________
www.milogarage.biz

As with everything getting a clean scuffed surface is a must. On these BMW bikes theres alot of hard to reach curves that call for patient
sanding/scuffing. A scotchbrite pad gets in there good

Attached Thumbnails

 

Here's where the time goes

Attached Thumbnails

 

All the pieces are test fit in the booth before final wash. Room has to be there to hit all angles and edges. All this set up just to be sure, then take it all out of the booth to mask off the parts stands and be clean about it

Attached Thumbnails

 

Parts can be hand held while being sprayed to get every angle and then slipped back in their holders..

Attached Thumbnails

 

G R N

Attached Thumbnails

 

Here's a pic of the light that goes on the back. Special order from Spain.

Attached Thumbnails

 

Check out the mini-me Looking forward to taking pics after it's all put together.

Attached Thumbnails