|
|
|||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
02-09-2002, 08:16 PM
|
||||
|
||||
Everybody ready?
This cars time has come. I 'll try to get some pics from the start of this project.
 Check these prior repairs--->Quarter Panel Fix
__________________
www.milogarage.biz 
|
|
#2
02-10-2002, 03:18 AM
|
||||
|
||||
|
Later that same day. In primer.
__________________
www.milogarage.biz
|
|
#3
02-12-2002, 07:50 PM
|
||||
|
||||
|
2-12-02
Driver quarter panel.
__________________
www.milogarage.biz
|
|
#4
02-12-2002, 10:25 PM
|
||||
|
||||
|
"Floated" out that section in thined filler . Then blocked with 80 grit by hand with longboard only, Guide (black mist color) coat will tell highs from low areas.
__________________
www.milogarage.biz
|
|
#5
02-14-2002, 04:52 PM
|
||||
|
||||
|
__________________
www.milogarage.biz
|
|
#6
02-18-2002, 11:54 PM
|
||||
|
||||
|
in PPG's NCP 280/285 epoxy primer
__________________
www.milogarage.biz
|
|
#7
02-18-2002, 11:56 PM
|
||||
|
||||
|
I was doing the other side when you weren't looking
__________________
www.milogarage.biz
|
|
#8
02-19-2002, 10:36 PM
|
||||
|
||||
|
Down here I welded in that section a while ago
 Anyway everyday I do something on this. Note it's off the ground today.
__________________
www.milogarage.biz
|
|
#9
02-19-2002, 10:45 PM
|
||||
|
||||
|
This car is so big it took two 6000 lb. lifts. One at each end.
__________________
www.milogarage.biz
|
|
#10
02-25-2002, 06:12 PM
|
||||
|
||||
|
Wet sanding putty
Water keeps 180 grit sandpaper clean and cutting smooth. 
__________________
www.milogarage.biz
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
